Traeger v01.01.01 Firmware Released!

[BlackBetsy]

I don't no it's about 20/24 ours now and still no update. Thanks Traeger!!!!

I stop with the update.....
Traeger has forgotten me thanks for the not good service!!! ?

 

[JordanK]

Should the firmware for D2 controllers be the same for all smoker models?

No. Different. Here is their official update page. The new update isn’t listed yet.

Traeger WiFIRE® Status & Known Issues

www.traegergrills.com

 

[dmlappert]

Strange process. Seems to cause confusion. They should list, announce, then push in a timely manner. Standard software update procedure...

 

[JordanK]

Strange process. Seems to cause confusion. They should list, announce, then push in a timely manner. Standard software update procedure...

I work in IT. You create the update. Push to a subset to assess if it worked or caused any issues. Then push it out en mass and publish the change log.

I would also suggest you register your grill on their website with the serial number.

 

[dmlappert]

Have already registered. Thanks.

 

[Dave1972]

They’ll get updates out to everyone.

 

[BlackBetsy]

Have already registered. Thanks.

My too!

 

[Johnmil2000]

After the update, temp still off but not as much.

 

[JordanK]

After the update, temp still off but not as much.

I’ve found the same thing. At the low end (I.e. 180F), it’s very close. At the high end (400F-450F), it’s still off but not as much as before.

 

[EvilKidsMeal]

I’ve found the same thing. At the low end (I.e. 180F), it’s very close. At the high end (400F-450F), it’s still off but not as much as before.

This was my finding as well. Double wrap of foil on the probe got me exact temps up high.

 

[primeone]

The T is in the house now!! ?

haha, can't beat that signal ?

 

[mickeykool]

So I have my T1300 in idle for about an hour now. Excellent Wifi (-38), and it hasn't updated the firmware. How long can this take? Hours?

I have a T1300 and still show v01.01.00 not sure if we get updates or not.

 

[dmlappert]

Turned mine off. Once the update appears in the log, I'll give it another go.

 

[dmlappert]

Okay, just discussed with Traeger CS the current firmware version issue. For the T1300, Firmware version 01.01.00 is still the current version. The updated version 01.01.01, being discussed, via this thread, was for other models. Seems the D2 controller firmware varies based on grill model. If true... resolves my concern.

 

[mickeykool]

Okay, just discussed with Traeger CS the current firmware version issue. For the T1300, Firmware version 01.01.00 is still the current version. The updated version 01.01.01, being discussed, via this thread, was for other models. Seems the D2 controller firmware varies based on grill model. If true... resolves my concern.

Thanks for looking into this.