Smoke Tube Suggestions & Trips

[MidwestSmoker]

You're playing with fire, son...get the biggest, baddest fire maker you can afford! There is no overkill!!

In that spirit, you may want a propane torch rather than the butane one I have. Consider getting this:

Bernzomatic Max Performance Torch 1 pc MAPP/Propane Mfr# TS8000T - Ace Hardware

The Bernzomatic Max Performance Torch is built with instant on/off ignition, an adjustable ultra-swirl flame and flame lock option for continuous use. It is pressure regulated for consistent performance when inverted, making it ideal for large diameter soldering, light brazing, woodworking and...

www.acehardware.com

 

[Slimpicker]

That's what I got and it only takes 10 seconds each to make them look like this:

 

[Murphy's Law]

In that spirit, you may want a propane torch rather than the butane one I have. Consider getting this:

Bernzomatic Max Performance Torch 1 pc MAPP/Propane Mfr# TS8000T - Ace Hardware

The Bernzomatic Max Performance Torch is built with instant on/off ignition, an adjustable ultra-swirl flame and flame lock option for continuous use. It is pressure regulated for consistent performance when inverted, making it ideal for large diameter soldering, light brazing, woodworking and...

www.acehardware.com

I have something very similar but honesty, I rarely use my smoke tube anyway! I was mostly just goofing around with my post.

 

[caplanner]

Ok. I was hoping to see it in the thread - where do you place the smoke tubes? I have an IW 650.

 

[MidwestSmoker]

Ok. I was hoping to see it in the thread - where do you place the smoke tubes? I have an IW 650.

I don't have a current picture, but I have posted them before. I lay it flat on the back, on the bottom shelf if there is space, on the top shelf if not. I notice that others place it on the side.

Some here use a brick angle the opening upwards a little.

 

[RayClem]

Remember that hot air from the fire pot moves up and around the drip tray coming out around the edges of the grill and circulating in the chamber. Thus, you want to place the smoke tubes near the edges where air will come through the tubes continuing the burn and mixing the smoke with the air flow. The air flow pattern might be different for every grill, so it might take some experimentation with placement before you learn what works best.

 

[GrillMeister]

Here it is in my Ironwood 885. Be sure to tap it as you fill it so they settle nicely. That way it will burn through with no gaps.

 

[Murphy's Law]

The physics of wood burning doesn’t work in my backyard. I swear I have never been able to keep one lit!!

 

[RayClem]

The physics of wood burning doesn’t work in my backyard. I swear I have never been able to keep one lit!!

Like any fire, they key is proper packing density of the wood. If the wood is packed too closely, there won't be enough air flow between the pieces to keep the fire burning. If the wood is packet too loosely, the pieces of wood will be too far apart for the fire to move through the pile.

If you are building a campfire, a bonfire, or a log fire in a fireplace, the same principles apply.

Many smoke tube users have found that a mixture of small wood chips and wood pellets be used to achieve the right density.

When lighting the smoke tube at one end, don't try to light it with a match or lighter. You need something on the order of a propane or butane torch to insure it is well lit.

 

[Murphy's Law]

Like any fire, they key is proper packing density of the wood. If the wood is packed too closely, there won't be enough air flow between the pieces to keep the fire burning. If the wood is packet too loosely, the pieces of wood will be too far apart for the fire to move through the pile.

If you are building a campfire, a bonfire, or a log fire in a fireplace, the same principles apply.

Many smoke tube users have found that a mixture of small wood chips and wood pellets be used to achieve the right density.

When lighting the smoke tube at one end, don't try to light it with a match or lighter. You need something on the order of a propane or butane torch to insure it is well lit.

I did have a mix and used a propane torch! That is the frustrating thing.

 

[Grato]

The physics of wood burning doesn’t work in my backyard. I swear I have never been able to keep one lit!!

Definitely go with a propane torch $25