Switz
Active member
- Joined
- Dec 4, 2020
- Messages
- 114
- Media
- 7
- Reaction score
- 33
- Location
- Phoenix area of Arizona
- Grill
- Century 885 w/ front shelf & pellet level
I purchased a new high quality power cord with the equipment plug on the end for the grill. I used this power cord. Note that it is available in lengths of 2 feet to 15 feet. This cord could go from the wall outlet directly into the grills power socket.
I then ordered this power adapter to create a usual power outlet for a three way 120Vac spitter if more than one of the thermometer systems wall warts need 120vac.
This is a typical power splitter
The heart of the project is this power cord
The extension cord plugs into the single male end. One of the female ends go to the grill and the adapter goes on the other female which all’s the three way to be attached for unto three 12Vdc power warts for the extra electronics.
The whole assembly can be attached to the bottom screen of the pellet hopper with wire ties.
10ft (3m) 16 AWG Hospital Grade Power Cord (NEMA 5-15P to IEC320C13) - Gray with Clear Connectors | Hospital Grade Power Cords | AC Power | Power Cords
Power cords used in hospitals and other medical settings must conform to strict standards for grounding reliability, assembly integrity, strength and durability, as well as regulatory standards such as NEMA and IEC specifications. These standards are in place to ensure that power cords are safe...
www.cablestogo.com
I then ordered this power adapter to create a usual power outlet for a three way 120Vac spitter if more than one of the thermometer systems wall warts need 120vac.
This is a typical power splitter
RIDGID 3-Outlet Power Hub Adapter 36005 - The Home Depot
This RIDGID Outlet Power Hub Adapter adds power wherever you need to get work done. Snap-close outlet covers with easy-open grips.
www.homedepot.com
The heart of the project is this power cord
The extension cord plugs into the single male end. One of the female ends go to the grill and the adapter goes on the other female which all’s the three way to be attached for unto three 12Vdc power warts for the extra electronics.
The whole assembly can be attached to the bottom screen of the pellet hopper with wire ties.